Product Overview

 

Sterile, single-use fluid delivery and aspiration devices engineered for clinical injection, fluid reconstitution, and diagnostic sampling. Product variants include standard hypodermic syringes, low-dead-space configurations, and safety-engineered needle systems designed to minimize medication waste and prevent sharps injuries.


Core deployment sectors encompass hospital inpatient wards, outpatient clinics, clinical laboratories, and OEM integration into diagnostic fluidic systems. Functional execution relies on smooth plunger displacement, positive liquid seal integrity under dynamic load, and permanent, high-contrast volume scales.

 

 
  • Reusable Insulin Pen Injector
    This reusable insulin pen uses replaceable 3 mL medication cartridges and supports variable dosing for repeated subcutaneous injections. The pen mechanism stays in use while the cartridge and pen
  • Disposable Pen Injector
    The Disposable Pen Injector is a prefilled multi-dose device that remains in use until the medication container is empty and is then discarded as one unit. It suits insulin, GLP-1, fertility, hormone
  • Insulin Delivery Pen
    The Insulin Delivery Pen is a handheld variable-dose device for daily subcutaneous insulin administration from a 3 mL cartridge. It is used in home-care, diabetes education and clinical treatment
  • Pen Injector Cartridge
    The Pen Injector Cartridge is the primary container assembly installed in reusable pens, disposable pens and cartridge-based autoinjectors. A typical assembly combines a 1.5 mL or 3 mL glass or
  • Drug Delivery Pen
    The Drug Delivery Pen is a configurable platform for repeated subcutaneous administration of insulin, GLP-1 medicines, fertility treatments, growth hormones, osteoporosis therapies and other peptide
  • 3ml Cartridge Pen
    The 3ml Cartridge Pen is a reusable variable-dose injection device for replaceable 3 mL medication cartridges. Filled cartridges are supplied separately and installed before use, making the pen
  • Single Use Insulin Pen
    The Single Use Insulin Pen is a prefilled multi-dose device with a non-replaceable cartridge. It is used for daily subcutaneous insulin administration until the usable insulin is exhausted, after
  • One Time Use Pen
    The One Time Use Pen is a prefilled fixed-dose device for one subcutaneous injection. After delivery, it remains permanently disabled. It suits emergency, intermittent-treatment and home-care
  • Self Injection Device
    This spring-assisted pen delivers medication subcutaneously from a 3 mL cartridge. It is intended for home-care, diabetes and other chronic-therapy programs in which patients or caregivers perform
  • Multi Dose Injector Pen
    A Multi Dose Injector Pen delivers several fixed or variable doses from the same medication container. The cartridge or prefilled reservoir remains in the pen for multiple injections, which suits
 
Materials and Construction
 

Manufacturing utilizes medical-grade polymers subjected to strict lot-to-lot traceability and dimensional validation.

Reusable Insulin Pen Injector

Barrel: Injection-molded clear polypropylene (PP), offering high optical clarity for bubble detection and chemical compatibility with common pharmacological agents.


Plunger Rod: Rigid PP profile featuring an optimized multi-rib internal geometry to prevent axial deflection under manual or mechanical push force.


Plunger Stopper / Gasket: Latex-free thermoplastic elastomer (TPE) formulated for low extractables. Features a dual-ring sealing profile to prevent liquid bypass and air leakage during high-pressure aspiration.


Silicone Lubricant: Medical-grade polydimethylsiloxane oil applied via automated micro-spray systems at controlled levels (max 0.25 mg per unit) to ensure consistent break-loose and glide force without fluid pathway contamination.


Needle Cannula (When equipped): Cold-drawn austenitic stainless steel tubing, precision-ground multi-facet lancet point with silicone coating to reduce tissue penetration resistance.

 

Key Features and Configuration Options

 

Tip interfaces include Luer Slip options featuring a 6 percent conical taper matching standard push-on needle mounting, and Luer Lock designs with integrated threaded collars providing secure mechanical lock-in against high-pressure fluid delivery or accidental disconnection, alongside eccentric and catheter tips for specialized drainage, irrigation, or feeding protocols.


Graduation scales utilize permanent silk-screened or laser-etched black graduation lines complying with volumetric accuracy limits, featuring extended ticks at major volume increments.


Low-dead-space designs incorporate extended stopper crowns protruding into nozzle hubs, reducing residual liquid volume by up to 50 percent to optimize high-value drug and vaccine utilization.


Safety mechanisms feature active and passive needle retraction or shielding clips integrated for occupational safety compliance in clinical settings.

Reusable Insulin Pen Injector suppliers

 

Applications
 

Clinical practice deployments cover subcutaneous, intramuscular, and intravenous injection, medication mixing, and blood specimen collection.

IVD and laboratory automation uses involve reagent transfer, precise sample aliquoting, and liquid handling modules within diagnostic instrumentation.

Pharmaceutical filling applications supply pre-fillable barrel formats for sterile contract packaging lines.

Veterinary administration supports high-frequency immunization and therapeutic dosing in animal healthcare.

 

Technical Specifications
 

Parameter

Specification Details

Reference Standard

Nominal Capacities

1 mL, 3 mL, 5 mL, 10 mL, 20 mL, 50 mL, 60 mL

ISO 7886-1

Barrel Polymer

Medical Grade Polypropylene (PP)

USP Class VI / ISO 10993

Gasket Elastomer

Latex-Free TPE (Thermoplastic Elastomer)

ISO 10993-5 / -10

Taper Geometry

Standard Luer Taper Configuration

ISO 80369-7 / ISO 594

Needle Gauge Range

18G through 30G (Custom lengths available)

ISO 7864

Sterilization Mode

Ethylene Oxide (EtO) / Gamma Irradiation

ISO 11135 / ISO 11137

Shelf Life

5 Years (Sterile barrier intact)

ASTM F1980

Primary Packaging

Bulk industrial or Single sterile peel-pack (Blister)

ISO 11607

 

Self Injection Device

 

Manufacturing and Quality Control

Production takes place in validated ISO Class 7 and Class 8 cleanrooms utilizing high-precision electric injection molding machinery and automated hot-runner toolsets.


Dimensional verification is performed through 100 percent automated optical inspection monitoring barrel inner diameter, plunger outer diameter, and taper concentricity against strict manufacturing tolerances.


Mechanical testing involves regular statistical sampling evaluating break-loose force, sustained glide force, liquid leakage under internal pressure, and axial separation resistance per international standards.


Biological and chemical audits cover routine testing for bacterial endotoxins via Limulus Amebocyte Lysate assay, particulate matter limits, sterility verification, and ethylene oxide residual control below max 1 ppm.

 

 

OEM, ODM and Customization Services

Tooling and mold engineering features in-house tool shops supporting custom barrel embossing, non-standard graduation layouts, and specialized capacity molds.


Component customization options include tailored plunger rod colors, specific thermoplastic elastomer hardness grades, and customized needle gauge and length combinations.


Packaging and UDI coding provide private-label blister thermoforming, customized corrugated master cartons, and barcoding compliant with standard Unique Device Identification requirements.


Regulatory dossier support includes complete technical file provisioning, biocompatibility summaries, and related documentation support for international market registrations.

One Time Use Pen best

 

 

Frequently Asked Questions

 

Q: Are the syringes entirely free of natural rubber latex and DEHP plasticizers?

A: All components utilize 100 percent synthetic, latex-free thermoplastic elastomer gaskets and medical-grade polypropylene polymers free of phthalates. Full material safety data sheets and biocompatibility test summaries are supplied during vendor audits.

Q: What is the standard production lead time for bulk container shipments?

A: Standard production lead time ranges from 25 to 35 days following final artwork confirmation and technical drawing sign-off. Expedited delivery schedules can be structured under multi-batch annual supply agreements.

Q: What quality management systems are applied during manufacturing?

A: Production facilities operate under rigorous internal quality management systems aligned with international medical device standards. Applicable verification reports, batch release testing data, and compliance documentation are provided during supplier qualification.

Q: What is the Minimum Order Quantity for custom-printed blister packaging?

A: The standard minimum order quantity for customized single sterile blister packs is 100,000 units per item code. For standard bulk industrial packaging utilizing unprinted boxes, the minimum order quantity begins at 50,000 units.

Q: How is plunger glide consistency controlled during high-speed production?

A: Automated, closed-loop micro-dispensers apply medical-grade silicone oil uniformly across the internal barrel wall at a maximum of 0.25 mg per unit. Random samples from every production lot undergo tensile bench testing to verify that break-loose and sustained glide forces meet strict operational thresholds.

Q: Can you manufacture non-standard needle gauges or special barrel volumes?

A: Through our OEM engineering services, we adapt mold cores for non-standard volumes and source certified surgical stainless steel tubing to execute custom needle gauge and length specifications.

 

 
Request a Quote
 
01/

To initiate a technical and commercial evaluation, submit your project parameters directly to our engineering team covering product type requirements for standard, low-dead-space, or safety configurations.

02/

Specify product specifications including required capacity, Luer Slip or Luer Lock connections, needle inclusion parameters, and standard versus low-dead-space configurations.

03/

Define volume requirements encompassing annual projected demand and target per-shipment batch quantities.

04/

Outline application contexts such as clinical, laboratory, or OEM fluidic integration environments.

05/

Provide quality and documentation details including applicable standards, required testing parameters, or performance specifications.

06/

Confirm packaging and sterility formats covering single sterile peel-pack or industrial bulk packaging alongside specific sterility requirements.

As one of the leading medical syringes manufacturers and suppliers in China, we warmly welcome you to buy discount medical syringes from our factory. All customized products are with high quality and low price. Contact us for quotation.

Insulin syringe, Single use Pen Injector, medical syringes
Send Inquiry